PANDIS

ACLUS (433.92) and CELIUS (868.3)

TESTER

Universal multifrequency remote control transmitter for gates, garage doors, barriers, alarms, etc. operating in all the following frequencies:

• 286 ÷ 361 MHz

• 384 ÷ 400 MHz

• 418 MHz

• 433.920 MHz

• 868.300 and 868.350 MHz

Frequency and code type are learned automatically!

No dip switches, no trimmers, nothing that should be tuned.

Easy programming mode without the need to open the enclosure and without external programmers.

Cheap universal remote control transmitters for garage doors, barriers, alarms, etc. operating in the following frequencies:

* ACLUS: 433.920 MHz

* CELIUS: 868.300 and 868.350 MHz

No dip switches, no trimmers, nothing that should be tuned.

Easy programming mode without the need to open the enclosure and without external programmers.

Note: while ACLUS is already available, CELIUS will be available starting from 12 October 2009.

Multifrequency remote control tester, battery supplied, very useful for remote control resellers because it is able to recognize original remote transmitters operating in the same frequencies of PANDIS, and return the following information:

• RoLL if the code is rolling

• Frequency, with 100KHz resolution, for example 868.3 or 314.8 or 433.9

• invalid code if it cannot be duplicated

• list of remote controls which can duplicate that original remote controls.

Note: TESTER will be available starting from 12 October 2009.

In PANDIS each button can store a code and a frequency indipendently of the other buttons. For example you can store on button:

1. hormann 868.3 MHz

2. marantec 433.92 MHz

3. FAAC 315 MHz

4. multicode 310 MHz

This is the only remote control in the market that permit to duplicate original remote transmitters operating in different frequencies.

286-361, 384-400, 418, 433.92, 868.3 MHz ALL-IN-ONE remote keyfob

ACLUS and CELIUS are a convenient solutions for users that do not need the versatility of PANDIS , but just need to duplicate in a single remote control transmitter up to 4 codes operating all in the same frequency:

433.92 MHz for ACLUS

868.3 MHz for CELIUS

Pressing the keybutton on the TESTER, the word SCAN will be shown, and TESTER will start scanning all the managed frequencies (433.92, 868.3, 286-361, 384-400, 418MHz) to detect the code transmitted by a remote control.

If the code is at 309.6 MHz and can be duplicated by PANDIS, the following information is displayed: Pan.6 309.6

If the original code is at 433.92MHz and is a KeeLoq rolling code, the following information is displayed: roLL Pan.1 CELI 868.3

which means: it's a rolling code, so beware the configuration on receiver; it can be cloned by PANDIS and CELIUS.

S429_1, S429_2, S429_4, S429_M

Be sure that your remote operates at 433.92MHz!

CASALI
GENIUS

pandis

GOL4
Note: These transmitters are rolling code and cannot be duplicated, but if you have a GOL4C device, you can duplicate it on ACLUS or PANDIS, and it works with all the DITEC receivers.

BIX LS2, BIX LP2, BIX LG4
Note: These transmitters are rolling code and cannot be duplicated, but if you have a GOL4C device, you can duplicate it on ACLUS or PANDIS, and it works with all the DITEC receivers.

DUCATI
ALLDUCKS

IRIS, IRIS 9CH.
Both colors red and blue

FADINI

BPT

300.000
310.000

MOTORLINE
STATEUROP

TX1, TX2, TX3, TX4, TX1/330
TX2/330, TX3/330, TX4/330

300.000
310.000

PHOENIX series: Phoenix2, Phoenix2P, Phoenix4, Phoenix4P.
Note:the receiver should be programmed with the rolling code feature disabled. When the code is learned, LED will blink for 6 times to highlight that the code is rolling.

WECLA
CDS

GENIUS
CASALI

NORMSTAHL
CRAWFORD

Rolling code