Frequently Asked Questions

In this section you will find answers to the most common questions about our products.

Please refer to the following documents:

• ACLUS instructions
• PANDIS instructions

QUESTIONS ABOUT REMOTE CONTROL DEVICES - LEARNING CODE

While learning original sender, ACLUS or PANDIS does not acquire the code, so the LED does not blink for 3 or more times

• verify that the original remote device works well and transmits in a frequency supported our devices (433.920 MHz for ACLUS, 286-361MHz or 384-400MHz or 418MHz or 433.92MHz or 868.3MHz for PANDIS, 868.3 MHz for CELIUS)
  Please take care that some remote controls transmits at 27-40MHz, 224MHz, 270MHz and several other frequencies that are not managed by our devices
• check that the original remote control is displayed into the compatibility list and not in the incompatibility list (see at the bottom of this page)
• take the original remote control near our device, and try to press the key on the original remote control 2 or more times
• retry the learning procedure pressing buttons 1 and 2, instead of 1 and 3, to bypass some checks

LED blinks 3 times, but the gate/door automation does not open

• retry learning the original code taking the original transmitter nearer or farther from our device
• verify that the original is not a rolling code: if so, check that the automation has rolling code check disabled
• if the original remote control transmit in the 286-400MHz band, retry learning code:

1. pressing the button N times to set the exact frequency

   Button pressed # times	Frequency
   4	300
   5	306
   6	310
   7	315
   8	330
   9	390

2. if the original frequency is unknown and the compatibility table below is useless, or if the original frequency is different from the frequencies in the table above, acquire the code pressing the button 3 times (automatic frequency scan) taking the original remote at 50cm from PANDIS: every time the LED blinks (scan restart), bring the original remote 20cm nearer: in this mode, you avoid the possibility for PANDIS to tune in a spurious frequency.

Learning the code from the original remote transmitter works, but not from a duplicated remote transmitter (REMOCON or other universal remote controls)

PANDIS, ACLUS and CELIUS learn the code from the original devices, but sometime cannot learn duplicated remotes like REMOCON because it's possible that REMOCON and other universal remotes do not transmit the code like the original sender, but strip the begin part (sync pulses, which are needed to correctly determine the kind of code and the timings). So, for certain types of code, you can learn only the original devices and not the duplicated ones.

Learning procedure does not work: while pressing together buttons 1+3 or 1+2 the LED blinks, then when I press the button where the code should be learned, the LED goes OFF

In this case the battery should be replaced, because it's voltage falls below the minimum voltage threshold when the receiver is turned ON.

Learning procedure does not work: LED remains always ON  while pressing buttons 1+3 or 1+2

Battery should be replaced, because it's voltage is below the minimum voltage in stand-by.

How should I learn code with PANDIS?

433.92 MHz?

1. Press buttons 1+3  together, on PANDIS, for about 3 seconds: LED start blinking fast

2. Press one time the button, on PANDIS, where you want to store the code: LED become always ON
   

3. Transmit from the original remote, from about 30cm of distance: when the original code is received, LED will blink 3 times (for fixed code) or 6 times (in case of rolling code)
   

868.3 MHz?

1. Press buttons 1+3 together, on PANDIS, for about 3 seconds: LED start blinking fast

2. Press two times the button, on PANDIS, where you want to store the code: LED become always ON

3. Transmit from the original remote, from about 30cm of distance: when the original code is received, LED will blink 3 times (for fixed code) or 6 times (in case of rolling code)

Does original remote transmit on the band 286-400 MHz, or 418 MHz?

1. Press buttons 1+3 together, on PANDIS, for about 3 seconds: LED start blinking fast

2. Press three times the button, on PANDIS, where you want to store the code: LED become always ON
   

3. Transmit from the original remote, from about 30cm of distance: when the original code is received, LED will blink 3 times (for fixed code) or 6 times (in case of rolling code)

Following the instructions above does not lead to a valid result?

Check the compatibility and incompatibility list below.

If your original remote control is not in these lists, probably your remote control is unknown: retry the procedure above pressing together  1+2 buttons on step1, instead of 1+3, to disable code checking.

A scheme to duplicate original transmitters on PANDIS is shown below:

OTHER QUESTIONS ABOUT REMOTE CONTROL DEVICES

What does "pandis R2" or "aclus R3" means?

The "R NUMBER" indicate the firmware revision of the device. For example, while "pandis" indicates every pandis device, "pandis R2" indicates every pandis device with firmware revision starting from 2.

For example, QUASAR TXSA2T is compatible with pandis R2, so it can be learned by pandis device with firmware revisions 2, 3, 4, ....

How can I know the firmware revision of my PANDIS/ACLUS/CELIUS device?

Open the remote device, remove the battery, wait few seconds, then reinsert the battery.

If the LED does not blink, the firmware revision is 1, else the firmware revision correspond with the number of blinks, i.e. if the LED blinks 2 times, that device has a firmware revision 2.

How should the PANDIS/ACLUS/CELIUS enclosure be opened?

List of compatible and incompatible remote controls

COMPATIBLE REMOTE TRANSMITTERS

Firmware revisions:
R2 - since Aug 17, 2009 (current)

Company	Frequency	Models	Photo	Supported by:
ADYX	433.920	ALIZE EM2C, ALIZE EM4C		pandis, aclus
AETERNA	433.920	TX433 1,2,4 buttons		pandis, aclus
ALLMATIC	306.000	ASMX2, ASMX4		pandis
	433.920	AEMX1, AEMX2, AEMX4		pandis, aclus
		EUROPE AUTO ARMY2, ARMY1, ARMY4		pandis, aclus
		MX1, MX2, MX4		pandis, aclus
ALLISTER	318.000	9931-318, 9931T-318		pandis
ALLSTAR	288.000	111025 Allister Pulsar Quickcode		pandis
		9921T-288, 9921MT, 9921TK, 9922T-288, 9923T-288, 9931-288, 9931T-288, 9931MT, 9931TK, 9931TK6, 8831T-288, 8832T-288, 8833T-288,8821T-288, 8822T-288, 8823T-288, 8832TK		pandis
		8833OCS-288		pandis
	318.000	9921T-318, 9921MT, 9921TK, 9922T-318, 9923T-318, 9931-318, 9931T-318, 9931MT, 9931TK, 9931TK6, 8831T-318, 8832T-318, 8833T-318,8821T-318, 8822T-318, 8823T-318, 8832TK		pandis
		110995 Allister Pulsar Quickcode		pandis
		8830OCS-318		pandis
ALLTRONIC	433.920	S429_1, S429_2, S429_4, S429_M Be sure that your remote operates at 433.92MHz!		pandis, aclus
		S425		pandis, aclus
ANSONIC	433.920	SA 434-1E, SA434-2E, SA434-3E, SA434-4E		pandis, aclus
		SA 434-1MINI, SA434-2MINI, SA 434-2Midi		pandis, aclus
	868.350	SA 868-1E, SA 868-2E, SA868-3E, SA868-4E		pandis, celius
		SA 868-1mini/M, SA 868-2mini/M (dip switch version)		pandis, celius
APERTO	433.920	CPS1, CPS2, CPS4		pandis, aclus
APRIMATIC	305.000	TS1, TS2		pandis
AUTELCO	286-306	TX300T		pandis
AVIDSEN	433.920	100601 micromark MM23164		pandis, aclus
		104505		pandis, aclus
		100951, 100955, 100550, 100400		pandis, aclus
B&D BnD BD	433.920	062170/4333EBD, 062171, 4333A		pandis R3, aclus R3
		062162		pandis R3, aclus R3
		PTX4 059120 / 059116		pandis R3, aclus R3
BANDY	433.920			pandis, aclus
BELFOX	433.920	DHS433-1, DHS433-2, DHS433-4, dip switch version		pandis, aclus
		DHS 433,92 (7733), dip switch version		pandis, aclus
	868.350	DHS 868,3, dipswitch version		pandis, celius
		HS 868-20		pandis, celius
BENINCA'	306.000	LOT1A, LOT2A, LOT4A		pandis
		LOTX1A, LOTX2A, LOTX4A		pandis
		LO.TX2PS		pandis
	433.920	LOT1W, LOT2W, LOT4W		pandis, aclus
		LOT2WMS		pandis, aclus
		T2WK, T4WK		pandis, aclus
		LOTX1W, LOTX2W, LOTX4W		pandis, aclus
		TO.GO2WP, TO.GO4WP, TO.GO2WK, TO.GO4WK		pandis, aclus
BESIDE	433.920	BEZAP		pandis, aclus
		HIT		pandis, aclus
BETA ELETTRONICA	330.000	BETALARM 5500		pandis
BFT	306.000			pandis
	315.000	VTM1, VTM2, VTM4		pandis
	418.000	GT01, GT02, GT04		pandis R2
	433.920	TE01, TE02 ( TEO1, TEO2 )		pandis, aclus
		TE04 ( TEO4 )		pandis, aclus
CAME	315.000	T312M, T314M		pandis
	433.920	T432, T434, TOP432A, TOP434A, TOP432, TOP432NA, TOP434NA		pandis, aclus
		TOP432M, TOP434M		pandis, aclus
		TAM432SA		pandis, aclus
		TOP432SA		pandis, aclus
		TOP432NA		pandis, aclus
		TWIN2, TWIN4		pandis, aclus
CARDIN	300.000	S300		pandis
	310.000	S301, S302		pandis
	433.920	S476 TX2, S476TX4		pandis, aclus
CARPER	300.000 310.000 318.000	C300, C310, C318, C318T		pandis R3
CASALI GENIUS	330.000			pandis
	433.920	Genius 433 2, Genius 433 3, JA400 TM433, JA401 TM433		pandis, aclus
CASIT	306.000	ERTS92B, ERTS92T		pandis
	433.920	ERTS92B, ERTS92T		pandis, aclus
		ERTS20DB, ERTS20DQ		pandis, aclus
		ERTS476D, ERTS476Q		pandis, aclus
		TXS1, TXS2, TXS3, TXS4, TXS6 ERTS97B, ERTS97T		pandis, aclus
CELINSA	433.920	S10 1, S10 2, SAW1, SAW2		pandis, aclus
CENTURION	433.920	CLASSIC, SMART, SMART2		pandis, aclus
CHAMBERLAIN LIFTMASTER MOTORLIFT SEARS CRAFTSMAN	300.000	Chamberlain 300MC (multicode)		pandis R3
	315.000	333LM		pandis R3
		360LM, 362LM, 363LM		pandis R3
	390.000	50CB, 53CB, 750CB, 753CB, 50LM, 53LM, 61LM, 62LM, 63LM, 139.53100, 139.53110, 139.53200, 139.53210		pandis R3
		54CB, 756CB, 54LM, 64LM, 859CB		pandis R3
		850CB, 853CB, 959CB, 81LM, 82LM, 83LM, 84LM, 99LM		pandis R3
		33LM		pandis R3
	418.000	4180, 4182, 4183		pandis R3
		4185		pandis R3
		787 remote keyless entry		pandis R3
	433.920	4330E, 4332E, 4333E		pandis R3, aclus R3
		4335E		pandis R3, aclus R3
CPS	433.920	TCP3, CPS, Jolly 4		pandis, aclus
		CPS1 TCP3, CPS2 TCP3, CPS4 TCP3 EM1CV, EM2CV, EM4CV		pandis, aclus
DASPI	433.920	Happy2, Pops2Â		pandis, aclus
DEA	306.000	306 1, 306 2, 306 4		pandis
		306		pandis
	433.920	433 1, 433 2, 433 4		pandis, aclus
		Genie		pandis, aclus
		Punto S2		pandis, aclus
		Dea MIO TD2, MIO TD4		pandis, aclus
DELMA	300.000	Apollo 300, ELSAMEC Apollo 300		pandis
		Mizard 300 1, Mizard 300 2, King		pandis
	433.920	Mizard 433 1, Mizard 433 2		pandis, aclus
		King 433 2		pandis, aclus
		Style Copy 2CH (this is a code duplicator)		pandis, aclus
DICKERT	433.920	MAHS433 01, MAHS433 04		pandis, aclus
		S10-433A1L00, S10-433A4L00, S20-433A1L00, S20-433A4L00, S20-433A1000, S20-433A4000		pandis, aclus
		S5-433-A2L00, S5U-433-A2L00		pandis, aclus
	868.350	HS868-21		pandis
		S5-868A2L00, S5U-868A2L00		pandis, celius
		S10-868A100, S10-868A400, S20-868A1L00, S20-868A4L00, S20-868A1000, S20-868A4000		pandis, celius
DIGICODE	300.000 310.000	DC5010, DC5012, DC5030, DC5032, DC5040, DC5042, DC5060, DC5062, DC5070, DC5072		pandis
DITEC	433.920	GOL4C		pandis, aclus
		GOL4 Note: These transmitters are rolling code and cannot be duplicated, but if you have a GOL4C device, you can duplicate it on ACLUS or PANDIS, and it works with all the DITEC receivers.		pandis,aclus
		BIX LS2, BIX LP2, BIX LG4 Note: These transmitters are rolling code and cannot be duplicated, but if you have a GOL4C device, you can duplicate it on ACLUS or PANDIS, and it works with all the DITEC receivers.		pandis, aclus
DOITRAND FDOITRAND	433.920	MPSTF2E JAUNE, MPSTF4E, HYPERPHONE MPSTF2E_GRISE		pandis, aclus
		TS2DE, TS4DE		pandis, aclus
DOORMATIC	433.920	SAW		pandis, aclus
DUCATI ALLDUCKS	433.920	TSAW1, TSAW2, TSAW3, TSAW4, 124 ELBER TSAW1, TSAW2, TSAW3, TSAW4 RONDY TSAW1, RONDY TSAW2, RONDY TSAW3		pandis, aclus
		TPR10-A, TPR20-A RONDY TPR10_A, RONDY TPR20_A		pandis, aclus
		TE2		pandis, aclus
		HC6203, 6203: only blue , red and transparent		pandis, aclus
ELBE	433.920	501, 502, 504		pandis, aclus
		502a, 504a		pandis, aclus
ELCA	300.000	Aster 1100, Aster 1101		pandis
	433.920	IRIS, IRIS 9CH. Both colors red and blue		pandis, aclus
		ASTER2		pandis, aclus
		Aster 1000, Aster1001. Colors: black, blue, light grey		pandis, aclus
		GEMINI 9CH		pandis, aclus
		VIRGO		pandis, aclus
ELEK	300.000	KTM194B		pandis
		KTR4		pandis
ELVOX	433.920			pandis, aclus
		ET03, ET04		pandis, aclus
	868.350	ET08		pandis, celius
EMFA	287.000	ET1, ET2, ET3		pandis
	308.000	ES_1, ES_2		pandis
ERONE	433.920	SETDS39433E2, SETDS39433E4		pandis, aclus
FAAC	315.000	T1, T2, T3		pandis
	330.000	TM1, TM2, TM3		pandis
	418.000	TM1 418 DS, TM2 418 DS, TM3 418 DS		pandis R2
		TM 418SL, TM1 418SL, TM2 418 SL, TM3 418SL		pandis R2
	433.920	TM1 433 DS, TM2 433 DS, TM3 433 DS		pandis, aclus
		TML2 433 SLR, TML4 433 SLR, TML2-433-SLR, TML4-433-SLR		pandis, aclus
		TML2 433 SLP, TML4 433 SLP, TML2-433-SLP, TML4-433-SLP		pandis, aclus
	868.350	TM1 868 DS, TM2 868 DS, TM3 868 DS		pandis, celius
FADINI BPT	315.000	ASTRO75-1, ASTRO75-2, ASTRO75-4		pandis
	433.920	433 2M, Astro43_2m		pandis, aclus
		Astro433-2, Astro433-4, Astro43-2, Astro43-4		pandis, aclus
FERPORT	433.920	Tac1, Tac2, Tac4, Tac1k, Tac2k, Tac4k, Tac2kr		pandis, aclus
GIBIDI	306.000	TS2M		pandis
	433.920	Open TMB 433, OPEN TMQ 433, OPEN OUT 2, OPEN OUT 4		pandis, aclus
GOBBATO	306.000	T306		pandis
GTO	318.000	GTO Mighty Mule 1/2 buttons, RB741, RB742		pandis
		GTO Mighty Mule 3 buttons, RB743		pandis
GULLIVER	306.000	MDRQ 306		pandis
	433.920	MDW 2E		pandis, aclus
HAUSS	433.920	Pocket 3750-1, Pocket3750-2, Pocket 3750-4		pandis, aclus
HEDDOF	318.000	P219-1, P219-2		pandis
		P220-1, P220-2, P220-3		pandis
HORMANN HOERMANN Hörmann	433.920	HSM2, HSM4, yellow buttons		pandis
	868.300	HS1, HS2, HS4, blue buttons		pandis, celius
		HSD2		pandis, celius
		HSE2, HSE4, blue buttons		pandis, celius
		HSM2, HSM4, blue buttons		pandis, celius
		HSP4, blue buttons		pandis, celius
		HSS2, HSS4, blue buttons		pandis, celius
		HSZ1-868, HSZ2-868		pandis, celius
HRC	433.920			pandis, aclus
JAY	433.920	UBEI x1 SL1		pandis, aclus
		UBET 11, UBET 21, UBET 31, UBET 41, UBET 61Â		pandis, aclus
JCM	290.000	ET1, ET2, ET3		pandis
KING	433.920	Note: receiver should be setup withrolling code feature disabled		pandis, aclus
LABEL IUPPITER	306.000	MDR, IUPPITER 306		pandis
	433.920	RJW/1E, RJW/2E, RJW/4E, RJW/12E		pandis, aclus
		MDW/1E, MDW/2E		pandis, aclus
LEB	306.000	TSA4		pandis
	433.920	TMW		pandis, aclus
		TSAW2N, TSAW4N		pandis, aclus
		TCP3  (this is a code duplicator)		pandis, aclus
		TRK4 Note: receiver should be configured to disable rolling check.		pandis, aclus
		TPW4		pandis, aclus
	868.300	TPK4		pandis, celius
LINCE	302.000	LE TX1, LE TX2		pandis
	433.920	LR 2035		pandis, aclus
LINEAR	300.000 310.000	MULTI-CODE 308911, 308913, 1089		pandis
		MULTI-CODE 412001, 414001, 109410, 109710		pandis
		MULTICODE 306010, 307010, 108210		pandis
		MULTI-CODE 308301, 308302		pandis
		MULTI-CODE 105015		pandis
	310.000	Delta3 Moore-o-Matic: DT, DT2, DT2A, DT22A, DTC, DTD		pandis R3
		Delta 3 Moore-o-Matic: DT3, DT4		pandis R3
		Delta 3 Moore-o-Matic: Mini-T LB "LadyBug"		pandis R3
	312.000	Delta3 DTK (canada)		pandis R3
MA SYSTEM	433.920	MA TX1, MA TX2, MA TX3		pandis, aclus
MARANTEC	433.920	D101		pandis, aclus
		D12		pandis, aclus
		Digital 302, D302		pandis, aclus
		Digital 304, D304		pandis, aclus
	868.300	Digital 302, D302		pandis, celius
		Digital 304, D304		pandis, celius
MEIßNER MEISSNER	433.920	LW433-1, LW433-2, LW433-4		pandis, aclus
		Pocket 3750 1, 2, 4		pandis, aclus
MONSEIGNEUR	433.920	ARC2, ARC4		pandis, aclus
		TDR 400 3845, TDR 400 3846, TDR 400 3847 T1SAW433, T2SAW433, T4SAW433		pandis, aclus
MOTORLINE STATEUROP	433.920	MX1, MX2, MX3, MX4, MX6 MX11, MX12, MX13		pandis, aclus
MOTOSTAR	433.920	CLIKSTAR2, CLICKSTAR4 CLICK-4M, CLICKSTAR 532, CLICKSTAR 534		pandis, aclus
NICE	306.000	EASY S1, S2, S4		pandis
	433.920	FLO1, FLO2, FLO4		pandis, aclus
		VERY VE		pandis, aclus
NOLOGO	306.000			pandis
	433.920	ECO DIP		pandis, aclus
NOVOTECNICA	306.000	BIT N1, BIT N2		pandis
		BIT NT1, BIT NT2, BIT NT4		pandis
OG	433.920	OG62, OG64		pandis, aclus
OPENOUT	306.000	TS2M		pandis
	433.920	TMQ 433 2, TMQ 433 4		pandis, aclus
PORTAMATIC	433.920	MPH01, MPH02		pandis, aclus
PRASTEL	306.000	NCSMT1, NCSMT2P, NCSMT4P		pandis
		KMFT2P, KMFT4P, KMFT2P93, KMFT4P93		pandis
	433.920	MPSTF2E, MPSTF4E		pandis, aclus
PROEM	433.920	ER2C4ACM, ER4C4ACM		pandis, aclus
PROGET	433.920	ETY_433N2, ETY 433N4		pandis, aclus
		EMI433-N2		pandis, aclus
PROTECO	433.920	TX433		pandis, aclus
		EUROMATIC		pandis, aclus
		HIT		pandis, aclus
PUJOL	288.000	JCM TRINARIO 1, TRINARIO 2, TRINARIO 3		pandis
	288.000	TT1, TT2, TRINARIO 1, TRINARIO 2		pandis
PULSAR	318.000	9931-318, 9931T-318		pandis
QUASAR	287.000	Tx SA4, Serie Argento, SA		pandis R2
	287.000	TXSA2T		pandis R2
	306.000	300 2, 300 4		pandis
	433.920	433 TANGO SLIM BLEU		pandis, aclus
RADIODIGIT	291.000	TBM, TCM		pandis
ROGER	433.920	R80/TX12, R80/TX14, R80/TX12R, R80/TX14R		pandis R3, aclus R3, or older versions pressing button 1+2 instead of 1+3
		H80/TX22
		G80/TX32, G80/TX34, G80/TX32R, G80/TX34R
SEA	433.920			pandis, aclus
		SMART433_TX2_DIP, SMART433_TX3_DIP SMART433_TX2_COPY,SMART433_TX3_COPY Smart2 Dip Switch, Smart3 Dip Switch		pandis, aclus
	868.350	231103, SEA868_4		pandis, celius
		231103, Head2 Dip Switch		pandis, celius
		SMART868-TX2-DIP, SMART868-TX3-DIP Smart2 Dip Switch, Smart3 Dip Switch		pandis, celius
SEAV	306/330	TX1, TX2, TX3, TX4, TX1/330 TX2/330, TX3/330, TX4/330		pandis
	433.920	TXS1, TXS2, TXS3, TXS4		pandis, aclus
		Behappy S1, Behappy S2, Behappy S3		pandis, aclus
		Be Easy TX, Be Easy Murale2		pandis, aclus
		BeSmart S2, BeSmart S4		pandis, aclus
		BeFree S1		pandis, aclus
	868.300	BeSmart H2, BeSmart H4		pandis, celius
		BeFree H1		pandis, celius
SECURVERA	433.920	SV R2C		pandis, aclus
		SV R2C		pandis, aclus
		SV R4C		pandis, aclus
		SV R6C		pandis, aclus
SENDER	433.920			pandis, aclus
SERAI	310.000	OG/32		pandis
	433.920	OG/52, OG/54, OG/82, OG/84		pandis, aclus
		OG/28, OG/48, OG/62, OG/64		pandis, aclus
		OG/02, OG/04		pandis, aclus
SICE	433.920	TX4 CLACK Bigfoot		pandis, aclus
SIMINOR	433.920	ER2C4ACM, ER4C4ACM		pandis, aclus
SKYLINK	300.000 310.000	MultiLink SD300M, Skylink 100, LD310M, SD310M		pandis R3
	318.000	Skylink Mltilink PD-318M		pandis
	390.000	Multilink CB-390M, CD-390M (versions compatible with Chamberlain)		pandis R3
SMD	433.920	LW433-1, LW433-2, LW433-4 : AM models only		pandis, aclus
SOMFY	433.920	LEB TMW		pandis, aclus
STAGNOLI	433.920	ZEUS AZTR		pandis, aclus
	868.350	ZEUS AZTR		pandis, celius
STANLEY	310.000	24286		pandis
		1082		pandis
		1050		pandis
		1094		pandis
		1097		pandis
STARTEC	433.920	TXQ2		pandis, aclus
STINGER	300.000 310.000 318.000 390.000	300MCD21V, 300MCD22V 310MCD21V, 310LID21V, 310LID22V 318ALD31V 390LMD21V, 390LMPB1V	diff. colors	pandis R3
TAU	315.000	250 TXA2, 250 TXA4		pandis
	433.920	250 SLIM, 250K-SLIM, 250K-SLIMC		pandis, aclus
		250TXD2, 250TXD4		pandis, aclus
		250BUG2, 250BUG4		pandis, aclus
		250T-4, 250T-4C		pandis, aclus
TEC KEY	300.000	MK1010		pandis
TECNOMATIC	433.920	TQ433		pandis, aclus
TEDSEN BERNER GFA	433.920	SKX1MD, SKX2MD, SKX3MD, SKX4MD		pandis, aclus
		SKX1KD, SKX2KD, SKX4KD, SKX6KD		pandis, aclus
		SKX1DL, SKX2DL, SKX3DL, SKX4DL		pandis, aclus
		SKX1LC, SKX2LC, SKX3LC, SKX4LC		pandis, aclus
		SKX1SL, SKX2SL, SKX3SL, SKX4SL		pandis, aclus
		SKJ		pandis, aclus
		SKX1WD, SKX2WD, SKX4WD, SKX11WD, SKX22WD, SKX44WD		pandis, aclus
TELCOMA	306.000	RCS TP2		pandis
		RCST2, RCST4		pandis
	433.920	TANGO 2 SW, TANGO4 SW		pandis, aclus
		TANGO BLUE 2, TANGO 4 BLUE, TANGO BLEU 2, TANGO BLEU 4		pandis, aclus
		TANGO 2 N, TANGO 4 N		pandis R3, aclus R3
		TANGO 2 SLIM, TANGO 4 SLIM		pandis, aclus
		Telcoma Noire2, Noire4 Note: Rolling-code jumper should be removed from the receiver!		pandis R3, aclus R3
		TANGO WIN3		pandis, aclus
		TANGO2, TANGO4		pandis, aclus
TELEMATIC	300.000	TL1, TL2		pandis
TKC	433.920	TSAW433		pandis, aclus
TONKARR	287.000	TK2		pandis
TORAG	433.920	S429 1, S429 2, S429 4		pandis, aclus
TORMATIC DORMA	433.920	HS, Dorma HS43 1E, HS43 2E, HS43 3E, HS43 4E		pandis, aclus
		MAHS, Siebau, Novoferm, Dorma		pandis, aclus
		MHS, MHS43-1		pandis, aclus
TREMA	433.920	TO93TV1, TO93TV2, TO93TV4		pandis, aclus
TUBAUTO	433.920	DIGITAL 101 433		pandis, aclus
V2	306.000			pandis
	433.920	PHOENIX series: Phoenix2, Phoenix2P, Phoenix4, Phoenix4P. Note:the receiver should be programmed with the rolling code feature disabled. When the code is learned, LED will blink for 6 times to highlight that the code is rolling.		pandis R2, aclus
		TCP3		pandis, aclus
		TCP3, ARC3		pandis, aclus
		TCP3		pandis, aclus
		TPR		pandis, aclus
		T1SAW/433, T2SAW/433, T4SAW/433		pandis, aclus
		TRR1, TRR2, TRR4		pandis, aclus
		PMR2, PMR4		pandis, aclus
	868.300	PHOENIX series: Phoenix2-868, Phoenix2P-868, Phoenix4-868, Phoenix4P-868. Note:the receiver should be programmed with the rolling code feature disabled. When the code is learned, LED will blink for 6 times to highlight that the code is rolling.		pandis R2, celius
VISONIC	315.000	WT100, WT100A, WT101, WT101A, WT102, WT104,WT-201, WT-201A, WT-201WP, WT-201AWP		pandis
	418.000	WT-100, WT-100A, WT-101, WT-101A, WT-102, WT-104,WT-201, WT-201A, WT-201WP, WT-201AWP		pandis
	433.920	WT 100, WT 100A, WT 101, WT 101A, WT 102, WT 104,WT 201, WT 201A, WT 201WP, WT 201AWP		pandis, aclus
WAINE-DALTON	433.920	S429-1, S429-2, S429-4, S429-mini		pandis, aclus
		S425		pandis, aclus
WECLA CDS	433.920	433, 433_2		pandis, aclus
ZULLAN	315.000	250TXA1H, 250TXA2H, 250TXA4H		pandis
OEM	315.000			pandis R2

Â

INCOMPATIBLE REMOTE TRANSMITTERS

Company	Frequency	Models	Photo	Notes
ALLMATIC	433.920	TECH3, BRO	Several different enclosures	Rolling code
APERTO	434.420	TX02-434-2		Rolling code
AVIDSEN	433.920	TOV		Rolling code
B&D	433.920	062170/4333EBD 1A4982		10 trinary
BFT	433.920	MITTO2, MITTO4		Rolling code
CARDIN	433.920	S435		Rolling code
		S438		FM dip switch
DUCATI ALLDUCKS	433.920	6203/R, 6203/P, 6204	Several different enclosures	Rolling code
FADINI	868.350	BIRIO		Rolling code, programmed by palm
GENIUS CASALI	868.350	AMIGO JA332, AMIGO JA334		Rolling code
HORMANN	433.920	RS2-433, RS4-433		Rolling code (KeeLoq)
NICE	30-40	BT1K, BT2K, BT4K, K1M, K2M, K4M	Several different enclosures	30-40MHz
	433.920	SMILO SM2, SM4		Rolling code
		FLO1R-S, FLO2R-S, FLO4R-S		Rolling code
NORMSTAHL CRAWFORD	433.920	EA433		Rolling code
PROEM / SIMINOR	433.920	ER2C4ACS, ER2C4ACS		Rolling code
PUJOL	433.920	P215/4, VARIO		Rolling code
RIB	312.000	312A
	433.920	433
SOMFY	433.420	Keytis NS 2 RTS, Keytis NS 4 RTS		Rolling code
WELLER	868.500	MT87A, MT87A4		Rolling code

Other questions

What is KeeLoq?

KeeLoq is the name of a coding developed by Microchip which is formed by

• 34 fixed pulses, which contains a 28 bits serial number (268435456 combinations), 4 bits corresponding with the buttons which are pressed, and other less important 2 bits;
• 32 rolling bits, which changes every time the button is pressed and contains, after decryption, a 16bit sync number (which is incremented every time the button is pressed), 10 bits which can be used to create 1024 different remote controls with the same serial number, and 4 bits which correspond with the pressed button.

In total, 66 bits are transmitted.

Some receivers check only the fixed part of the KeeLoq code, because the decryption algorithm takes a lot of time to be performed and need space in RAM and ROM. In this case, any KeeLoq remote control associated to these receivers can be duplicated.

The most receivers check both the fixed part and rolling part of the code, to achieve an higher level of security: in this case the remote controls cannot be duplicated. Decryption algorithm need to know a 64bit code, called Manufacturer code, which is secret, and the most important value returned is the sync number, the number of times the button is pressed. Normally, the receivers manage the sync number in this way:

• if sync_number = sync_number_old+1 then activate the automation
• if (sync_number - sync_number_old) >=32768 then ignore it
• if sync_number > sync_number_old then wait that button is pressed another time and check that the new sync_number is incremented: this process is called resync.