2GPF Elettronica

Our multifrequency remote control PANDIS is able to duplicate FAAC TM 418SL and FAAC TM 418DS transmitters, as like as other devices operating at 418 MHz band like BFT, Liftmaster, Visonic.

The main advantage using PANDIS is that it permits to store into the same remote control other transmitters operating in different frequencies. For example you can use a PANDIS device to transmit FAAC TM1 418SL on button 1, FAAC TML 433SL on button 2, CAME TOP432NA at 433MHz on button 3, HORMANN HSM4 at 868MHz on button 4.

PANDIS is the only remote control transmitter, in the market, operating in all these bands:

• 433.92 MHz
• 868.3 MHz
• 286-365 MHz (287, 300, 305, 306, 315, 330 MHz, and every frequency inside these band)
• 384-400 MHz (390 MHz, for example)
• 418 MHz

Please consider that 418MHz is not an harmonized band for Europe countries, so the new installations in Europe should uses different frequencies (433.92, 868.3 MHz).

Our remote controls PANDIS and ACLUS are compatible with DITEC remotes GOL4C, GOL4 and BIX in this way: because DITEC receivers supports both GOL4C (fixed code) and GOL4 / BIX LS (rolling code), you can duplicate a GOL4C remote to ACLUS or PANDIS, then using ACLUS or PANDIS to increase the number of remote controls for your automation. Obviously, if you have only GOL4 or BIX LS remotes, you cannot duplicate anything because they are rolling code. You need at least one GOL4C!

This solution was tried with the receivers BIX LR 12 and BIX LR 22, but most probably it should work with every DITEC automation.